Monday, August 7, 2023

Survival Priorities, First, Second, Third...In That Order©

 


 

Recently, I found a copy of United States Navy, Sea & Land Survival, Device 9B7, I was intrigued by how it broke down a survivor’s priorities into separate lists for land and water survival.  Also, I noticed that were different, but similar, to the survival priorities described by the “Rule of Threes”.  It got me thinking and so, here are some thoughts, on why survival priorities are listed just “...in that order...”. 

 



Water survival equals floating...

 


Flotation, this is where land and water survival priorities differ, because if you suddenly dropped into a water survival situation the first thing you need to do is to keep your head above water!

 

If you are traveling over water, by boat or plane, you should always wear a Personal Flotation Device (PFD); the Transportation Safety Board of Canada conducted a study of 103 fatal plane crashes between 1975 and 1990 and found that approximately three out of every four people, who died as the result small plane crashes into water, died from drowning1, and 10% were unconscious due to non-fatal injuries when they drowned.  So, don’t sit on or stow that PFD, wear that it!

 


Being wet or in cold water can kill you, as it quickly causes hypothermia, a condition where your body can not produce or conserve enough heat to survive.  And as you get colder the dexterity of your hands drops off quickly, and the colder you get, the faster this happens.  When your hand’s skin temperature drops to 55 to 65o F (13 to 18o C), dexterity begins to drop off.  At a hand skin temperature of 50o F (10o C), you will experience numbness and diminished feeling, your ability to tie and untie knots will fall by 25% and your grip strength decreases by as much as 50%.  In cases of total body immersion in water that is 32o F (0o C), you can lose hand dexterity in less than a minute! 

 

If you are in the water and you can get out, either by getting to land, or by boarding a raft or a boat, do it as soon as possible, before your hand dexterity declines.  For the same reason, once you are in the raft, or out of the water, you need to carry out all necessary survival activities before your hands get too cold.

 

 

For more on this, read ‘Being Wet Kills, Fast!©”, HERE.

 

The ABCs of first aid

 

As soon as you can after the crash, or after you are safe from drowning, you should provide first aid to the injured.

 

Start with the ABCs of first aid and first check to make sure an unconscious, injured person’s airway is open and that they are breathing, by looking, listening, and feeling, for signs of respiration.  If they aren’t breathing, then begin artificial respiration and continue until they begin to breath on their own, a trained person relieves you, or you are exhausted and cannot continue.  After the first two breathes, check for a pulse and if there

is no pulse begin cardiopulmonary respiration (CPR).  Again, once you have started CPR, continue to provide it until either their heart begins to beat on its own, a trained person relieves you, or you are exhausted and cannot continue.  


If the injured person is bleeding, especially if the blood is bright red and spurting, you have only moments to stop the bleeding before death occurs.  Severe bleeding can quickly become life-threatening, and the average time to bleed out is only two to five minutes.

 

Also, in a survival situation, infections can quickly become life threating, so clean and cover cuts and injuries, if possible.

 

Look for the signs of shock among the injured, also, and keep them warm, covered and reassured.

 

Shelter

 


According to the “Rule of Threes”, and the land and water survival priorities, shelter is the next most important thing you need to do after treating any injuries and providing first aid.  As soon as possible, protect yourself from the wind and the elements, because if your clothes are wet, and it is windy, you will lose body heat 240 times faster than if your clothes are dry. 

 


Once your shelter or wind-break is built, build a fire.  In survival situations fires are vital for warmth, and disinfecting water.  Fire is the only comfort of civilization that can easily be taken with you into the wilderness IF you are prepared and have learned how to build one.  Fire provides warmth, discourages wild animals, allows for thawing and disinfecting water, and provides a large measure of mental comfort and support.

 


For more on building a fire, read “Could You Survive, Survival Priorities©”, HERE, “The Top Ten Wilderness Survival Skills...Number Six©”, HERE, “The Top Ten Wilderness Survival Skills...Number Seven©”, HERE, “Remember This If You Want to be Warm ©”, HERE, “Your Campfire and How to Use It ©”, HERE, and “Winter Survival for Tommy...Part Five©”, HERE.

 

“E.T. phone home...”

 


The next most important thing after you have found or built shelter from the wind and the elements, is to create some signals to help the rescuers find you. 

Remember, it is not always easy to see you or the wreck, so you need to make it easier to be spotted, and that is where signals come in.

 

There are many ways of attracting attention, but some things attract attention better than others, so try blowing a whistle, flashing with a mirror, making an SOS symbol, lighting three fires in a row or a triangle, making smoke signals, etc.  Be ready to signal as soon as you see or hear signs that rescuers are approaching.

 

The simplest distress signal is an “SOS” signal, tramped out in the snow.  The letters should be made by stomping out wide paths to form letters at least ten feet (3 meters) square and ten feet (3 meters) apart.  It would be better to make the letters using a 6 to 1, vertical to horizontal ratio, where the vertical lines are 60 feet tall (18 meters), and the horizontal lines are ten feet wide (3 meters).  If possible, rocks, wreckage, or pine boughs should be laid in the tracks to emphasize the letters.

 


Water



In a survival situation, living is spelled W A T E R!  You can only survive for about three days without water to drink.  But remember,it is the water inside you that counts, don’t be that guy who is so compelled to ration his water that he dies of dehydration with water still in his canteen.  Don’t ration water, ration sweat and preserve body water , by moving or working at night when it is cooler, staying out of the sun, avoiding eating if you are low on water, etc.

 


For more read “Melting Snow and Ice ©”, HERE, “Fire Burn and Cauldron Bubble...The 5 Stages of Boiling©”, HERE, “...No soldiershould Drink any water without it Being Boiled...©”, HERE, “Water Disinfection: When is boiled, boiled enough…? ©”, HERE, and “They Can’t Cure Dead ©”, HERE. 

 




Food

 

You can live weeks without eating, so don’t stress out about not having anything to eat.  Food is usually the last thing that you will need in a survival situation, and you can live weeks without eating, so don’t stress out about not having enough or anything to eat. 

 


Food does become more important in a cold environment though because you will need calories to keep your heat furnace going. 

 

A good rule of thumb to remember though is that, if you don’t have any water to drink, DO NOT EAT!  While this is true in general, and in particular with protein rich foods, carbohydrates as they are digested produce metabolic water and can be eaten when water is scarce.

 

Metabolic water is the water produced when food is digested.  If available, eat sugary foods like sucking candies or packets of sugar.  The digestion of carbohydrates produces a net gain of metabolic water as they are digested by your body and will provide energy to run your heat furnace.  Proteins, on the other hand produce the least metabolic water, and in fact require the metabolic water that is produced, to excrete the urea and other waste products of protein digestion. 

 

In a survival situation all food should be boiled or stewed, and the water used to cook the food should be saved and drunk, because alarge amount of vitamins and nutrients from the food will be in the water.

 





Don’t forget to come back next week and read “A 'Compact' Survival Kit©”, where we will talk about making a minimum, basic survival kit.

 


I hope that you continue to enjoy The Woodsman’s Journal Online and look for me on YouTube at BandanaMan Productions for other related videos, HERE.  Don’t forget to follow me on both The Woodsman’s Journal Online, HERE, and subscribe to BandanaMan Productions on YouTube.  If you have questions, as always, feel free to leave a comment on either site.  I announce new articles on Facebook at Eric Reynolds, on Instagram at bandanamanaproductions, and on VK at Eric Reynolds, so watch for me.

 

That is all for now, and as always, until next time, Happy Trails!

 

 

Notes

 

1 The study found, that 10% (or 17 persons) were incapacitated or unconscious  from non-fatal impact injuries and drowned and that an additional 67% (or 42 persons) died from drowning.

 

From “Seaplane Water Survival”, by H. Dean Chamberlain,

 

 

Sources

 

Burkhardt, Robert; “A Matter of Iron Rations”, The Skipper, June 1960, [The Skipper Publishing Company, Washington, D.C.] page 26, 49 – 51, https://books.google.com/books?id=_agPAAAAIAAJ&pg=RA7-PA51&dq=pocket+survival+kit&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwjElLbTu778AhUJMlkFHdkbCSk4RhDoAXoECAkQAg#v=onepage&q=pocket%20survival%20kit&f=false, accessed February 8, 2023

 

Calvert, John H., Jr. Colonel; “Frostbite”, Flying Safety, October 1992, Publication 127-2, Vol. 48, No. 10, [United States Airforce, 1992], pages 14 - 15, https://books.google.com/books?id=W2PU4Rad3JMC&pg=RA21-PA26&dq=survival+pamphlet&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwim-sLv-cT8AhWMKFkFHf9FA184PBDoAXoECAkQAg#v=onepage&q=survival%20pamphlet&f=false, accessed January 13, 2023

 

Chamberlain, H. Dean; “Seaplane Water Survival”, FAA Aviation News: A DOT/FAA Flight Standards Safety Publication, Volumes 33-34, July-August 1995, pages 10 to 12, https://books.google.com/books?id=IP05AQAAMAAJ&pg=RA12-PA12&dq=faa+aviation+news+july-august+1995+%22of+the+168+occupants%22&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwj-hpmznMuAAxWEFlkFHRT5B5EQ6AF6BAgHEAI#v=onepage&q=faa%20aviation%20news%20july-august%201995%20%22of%20the%20168%20occupants%22&f=false, accessed August 7, 2023

 

Combat Crew Training Wing; “Obtaining Water”, Flying Safety, October 1992, Publication 127-2, Vol. 48, No. 10, [United States Airforce, 1992], pages 26, https://books.google.com/books?id=W2PU4Rad3JMC&pg=RA21-PA26&dq=survival+pamphlet&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwim-sLv-cT8AhWMKFkFHf9FA184PBDoAXoECAkQAg#v=onepage&q=survival%20pamphlet&f=false, accessed January 13, 2023

 

Mullen, John, SSGT; “Surviving the Winter Emergency”, Flying Safety, United States Air Force, November 1985, Volume 41, Number 11, page 2-7, https://books.google.com/books?id=h9qH2OtBlcoC&pg=RA8-PA5&dq=winter+survival+car+improvised&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwisus3HiuP8AhXjEFkFHSwLDwkQ6AF6BAgGEAI#v=onepage&q=winter%20survival%20car%20improvised&f=false, accessed January 27, 2023

 

Rathbone, Thomas M., Lt.; “Bligh’ Me-Survival at Sea”, Surface Warfare, Volume 5, Issue 11, November 1980, page 16 to 17, https://books.google.com/books?id=XNQDYsVnxQIC&pg=PA17&dq=body+fat+survival+sea&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwiwgovgmb6AAxVMGFkFHZwTDak4ChDoAXoECAYQAg#v=onepage&q=body%20fat%20survival%20sea&f=false, accessed August 7, 2023

 

United States Navy, Sea & Land Survival, Device 9B7, [Naval Training Equipment Center, Olando, FL], https://books.google.com/books?id=R3er5Ef-m28C&pg=PP1&dq=land+survival+9b7&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwjHob3u4dD_AhXbKFkFHaHHAZUQ6AF6BAgDEAI#v=onepage&q=land%20survival%209b7&f=false, accessed Aug 1, 2023

 

Department Of The Air Force, Survival Training Edition, AF Manual 64-3, [Air Training Command, U.S. Government Printing Office, Washington, D.C., August 15, 1969], page 2-7 to 2-10, https://books.google.com/books?id=UaapWEpqo4cC&pg=PP3&lpg=PP3&dq=%22survival+training+edition%22+Af-64-3&source=bl&ots=EQPVWHeJ8j&sig=ACfU3U2tRMF4EHMi96DVdMj-9tV_MA3xWQ&hl=en&sa=X&ved=2ahUKEwimvOjN6vvnAhXEla0KHZPTAO44ChDoATABegQICRAB#v=onepage&q=%22survival%20training%20edition%22%20Af-64-3&f=false, accessed April 16, 2018

 

Wright, H. T., CWO; “Rigger’s Loft”, On Scene, May 197, page 17 to 18, https://books.google.com/books?id=uO0oLB7mws0C&pg=RA2-PA18&dq=days+of+food+around+your+middle+survival+sea&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwjQ67bdmL6AAxXZrYkEHeNWCzw4HhDoAXoECAUQAg#v=onepage&q=days%20of%20food%20around%20your%20middle%20survival%20sea&f=false, accessed August 7, 2023

 

Sunday, July 30, 2023

“The Anatomy of a Match©”

 

 


Last week we talked about what a marvelous invention the ordinary match is and how it is equal to Tesla’s AC generator and motor, as a civilization changer, but how are matches made and what makes one match a safety match and the other a strike-anywhere matches?

 


To make strike-anywhere or strike-on-box safety matches you need the following components:

 

1)      A gritty substance such as ground glass, to increase friction.


 

2)      A low kindling temperature substance, such as red phosphorus or phosphorous sesquisulfide.  Heat from friction changes the red phosphorus or phosphorous sesquisulfide into white phosphorus, which is extremely flammable, and instantly reacts with oxygen in the air, causing it to ignite.

 

3)      An oxidizing substance, like potassium chlorate, zinc oxide, or manganese dioxide, helps the match to burn by decomposing to provide more oxygen.  The heat from the white phosphorus oxidizing sets off the decomposition of potassium chlorate to give oxygen.  

 

4)      An easily oxidizable substance that ignites at a low temperature, such as sulfur compound, like lead hyposulfite, iron sulfide (also known as pyrite, or “fool’s gold”), or antimony trisulfide.  The extra oxygen helps the sulfur compounds ignite and burn, which ignites the wood and paraffin. 

 

5)      Paraffin to help sustain the flame.

 

6)      Glue to bind all the other ingredients together, except the paraffin.  The glue that binds the matchhead together is animal glue and is mostly made of a protein collagen extracted by boiling bones, hides or horns.  For the mixture of ignition, friction agents, and oxidizing and oxidizable substances in the matchhead to work effectively, they must be in close contact and uniformly distributed throughout the animal glue.  The glue also contains the various starches, resins, and dyes that are part of the match.

 


How you divide up these components, between matchstick and striking surface is what determines if it is a strike-anywhere or strike-on-box safety match.

 


Strike-on-box safety matches

 


Besides animal glue, the tip of the strike-on-box safety matchhead is made up of a gritty substance to increase friction, an oxidizing substance, an oxidizable substance and various starches, resins, and dyes.

 


The on-the-box-striking-surface that is used to ignite the match is made of a substance with a low kindling temperature and an oxidizable substance.

 

Strike-anywhere matches

 

Besides animal glue, the tip of the strike-anywhere matchhead is made up of a gritty substance to increase friction, a small amount, about 3%, of a low kindling temperature substance, an oxidizing substance, an oxidizable substance and various starches, resins, and dyes. 

 


The tip or “bird’s eye” of the strike-anywhere match is made up of a gritty substance to increase friction, a larger amount, about 24%, of a low kindling temperature substance, an oxidizing substance, an oxidizable substance and various starches, resins, and dyes.  .

 

Putting the match on the stick

 


Wooden matchsticks are made of white pine or aspen wood and have an ignition temperature which varies widely depending on the species of wood, its size, moisture content, etc., and is usually between 400o to 500o (204o to 260o C).  The common matchstick is first dipped in a dilute aqueous solution of ammonium phosphate, a fire retardant chemical, which slows the burning rate of the wood and prevents after-glow.  The matchsticks are then taken through a drying chamber and while still hot are dipped into molten paraffin wax.  The first application of matchhead material is applied to the matchstick and then the matches are sent back through a drying chamber.

 

If the matches are going to be strike-anywhere matches, then the next step is the application of the ignition material onto the tip of the matchhead. 

 

At this point both types of matches are often dipped in formaldehyde to render the glue in the matchhead material more resistant to moisture and then the matches are dried for the final time and boxed up.

 

Putting the match in the book

 


Book matches are both similar and different from their close cousins the strike-on-box safety match.  They are made from a specially made cardboard, cut into strips 1-7/8 inches (4.75 cm) wide, with tear-off splints 1-3/8 inches (3.5 cm) cut into it.  The cardboard is then dipped in molten paraffin, dipped into strike-on-the box safety matchhead material, dried, and stapled into covers, the bottom of which is covered in a striking surface material.

 


And now we know how that most marvelous invention, the match is made, and what makes one match a safety match and the other a strike-anywhere match.  So next time you light one, take a second to consider what an awesome invention it truly is.

 

Don’t forget to come back next week to check out the next article.

 

I hope that you continue to enjoy The Woodsman’s Journal Online and look for me on YouTube at BandanaMan Productions for other related videos, HERE.  Don’t forget to follow me on both The Woodsman’s Journal Online, HERE, and subscribe to BandanaMan Productions on YouTube.  If you have questions, as always, feel free to leave a comment on either site.  I announce new articles on Facebook at Eric Reynolds, on Instagram at bandanamanaproductions, and on VK at Eric Reynolds, so watch for me.

 

That is all for now, and as always, until next time, Happy Trails!

 

 

Notes

 

 

Sources

 

American Gas Journal; “Lesson 101...Combustion”, January 2, 1926, Volume 124, No. 1, American Gas Journal, page 7, https://books.google.com/books?id=BZtijHmlkH0C&pg=PA7&dq=how+fast+do+matches+ignite&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwiXs5mPm5yAAxUrEFkFHas8Bbo4UBDoAXoECAkQAg#v=onepage&q=how%20fast%20do%20matches%20ignite&f=false, accessed July 22, 2023

 

Caldwell, Otis W., Ph. D.; and Meier, W. H.D., Ph. D.; Open Doors to Science with Experiments, [Ginn and Company, New York, 1926], page 106 to 111, https://books.google.com/books?id=spQNAQAAIAAJ&pg=PA111&dq=%22strike+anywhere+match%22&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwiAzJemg4D9AhVyEFkFHS-ZCj44PBDoAXoECAUQAg#v=onepage&q=%22strike%20anywhere%20match%22&f=false, accessed July ‎18, ‎2023

 

Greer, Carlotta C., and Bennett, J. Cora; Chemistry for Boys and Girls, [Allyn and Bacon, New York, 1925], page 693, https://books.google.com/books?id=fO1EAAAAIAAJ&pg=PA692&dq=%22strike-anywhere+match%22+chemistry&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwjSis7I5YT9AhXWMlkFHQkXB54Q6AF6BAgCEAI#v=onepage&q=%22strike-anywhere%20match%22%20chemistry&f=false, accessed July 22, 2023

 

Hough, Walter; Fire-Making Apparatus in the United States National Museum, [Government Printing Office, Washington D. C., 1890], page 542 to 578, https://books.google.com/books?id=eIpGAQAAMAAJ&printsec=frontcover&dq=how+long+to+create+a+fire+with+%22flint+and+steel%22&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwiQn5mS15mAAxW3EVkFHQu-DckQ6AF6BAgCEAI#v=onepage&q=how%20long%20to%20create%20a%20fire%20with%20%22flint%20and%20steel%22&f=false, accessed July 18, 2023

 

Snyder, William H., Sc. D.; General Science, [Allyn and Bacon, New York, 1925], page 83 to 88, https://books.google.com/books?id=cttEAAAAIAAJ&pg=PA88&dq=%22strike+anywhere+match%22&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwjH5sXigID9AhWFF1kFHdWZD8A4HhDoAXoECAQQAg#v=onepage&q=%22strike%20anywhere%20match%22&f=false, accessed July ‎18, ‎2023

 

U.S. Department of Commerce, “Matches”, [National Bureau of Standards, Washington D.C. 1949], https://books.google.com/books?id=o7Ilez_u5eYC&pg=PA2&dq=%22strike+anywhere+match%22&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwjH5sXigID9AhWFF1kFHdWZD8A4HhDoAXoECAUQAg#v=onepage&q=%22strike%20anywhere%20match%22&f=false, accessed July 16, 2023

 

Wikimedia, “Burning match”, by Осадчая Екатерина, December 9, 2014, https://commons.wikimedia.org/wiki/File:Burning_match.jpg, accessed July 16, 2023

 

Wikimedia; “A lit match stick”, May 22, 2012, by Jith JR, https://commons.wikimedia.org/wiki/File:Match_stick,_lit_a_match,_match_box,_fire.JPG, accessed July 25, 2023