Author’s note -- I hope that you enjoy learning from this resource! To help me to continue to provide valuable free content, please consider showing your appreciation by leaving a donation HERE. Thank you and Happy Trails!
All
right let’s face facts... the thing you miss most when you are out in the
wilderness is pure, running water. If your
tap runs dry when you turn it, you’re going to miss that clean, pure water
right away! Everybody’s been
anxious lately. Talking about ‘prepping’.
Maybe you have been too. You
probably went out and bought a case or two of bottled water just to be safe. Now you’re all good... right?!
Well
maybe. The CDC recommends storing at
least 1 gallon (3.785 liters) of water per person, per day for drinking,
cooking, brushing teeth, and other uses (this does not include daily cooking
needs). A standard 24-bottle case of
16.9 fl. oz (500 mL) water bottles holds 405.6 fl. oz, which is about 3.17
gallons (or 12 liters), that’s about three days of water for one person. . A larger 40-bottle case of 16.9 fl. oz
bottles holds 676 fl. oz, or about 5.28 gallons (or 20 liters), or only five
days of water for one person.
Honestly,
you just can’t have enough access to clean, pure water in a survival situation. You need it to drink. For first aid. And for keeping clean. And boiling isn’t always an option. You might not have much, or any fuel. And flames produce light and smoke... and there
are situations where this might be a problem.
That
is why you want a water filter by Sawyer® or MSR®. Personally I prefer Sawyer’s products. I know the engineer who created the filter that
Sawyer markets. I’ve used both Sawyer
and MSR® and I think Sawyer filter’s produce clean water longer between
backflushing than the MSR filters do.
But that’s just me. What are the
facts.
The
Sawyer® water filtration system and its PointOneFilter™, use technology adapted
from the filters of kidney dialysis machines. The Hollow Fiber Membrane Filters inside the Sawyer®
PointOneFilter™ are composed of tiny ‘U’ shaped micro tubes that allow water to
enter their core through tiny micro pores on the side walls of the tubes. No pore is larger than 0.1 micron in the filter. Because these pores are so small no harmful
bacteria, protozoa, or cysts, such as E. Coli, cholera, or typhoid, can pass
through the filter, which exceeds the EPA pathogen removal rate standards. Additionally all Sawyer filters will remove
100% of microplastics from water.
Sawyer
does NOT batch test or statistically test their filters for failure. Instead EACH Sawyer® PointOneFilter™ is individually
tested three times. The first test is conducted
right after the hollow-fiber membrane element is constructed to verify that no
pore is larger than 0.1 microns absolute.
The second and third tests are after the casing is assembled to ensure
there are no leaks through the sealed case or internal O-rings.
Thicker
fiber walls and smaller inner diameter of the fibers make Sawyer fibers ~75%
stronger than fibers of other typical hollow fiber membranes. These stronger fibers allow for aggressive
backwashing and better shock resistance. This means each Sawyer filter can be
continually backwashed forcefully, which restores up to 98% of the original
flow rate.
Quality
Control
And the standard Sawyer filter is rated for up to 100,000 gallons, (378,541 liters) although according to Sawyer the 100,000 gallon rating was achieved using relatively clean water in a controlled lab setting.
For home use, grid-down, ‘bug-in’ situations the Sawyer International Bucket System, HERE, is what you want to have. Sawyer has designed this system to be use with any size container you can drill a hole in. The Sawyer Mini Water Filtration System Bucket Adapter Kit will also fit into most water crocks by removing the existing valve and replacing it with the fittings supplied with the filter. They also suggest for greater output, you can hook multiple filters up to a large cistern or rainwater catchment system. But in that case, you will want to use a longer hose, so you can raise the filter above the water level to shut off the flow.
They suggest using attaching the filter to a clean container that is either food grade or was previously used to transport food items. I suggest using a clean five gallon bucket because that much water weighs about 41.7 pounds (or 18.9 kilograms). Any larger and it will be hard lift, and you need to elevate it to get good flow.
So
to get ‘Prepped’ for any upcoming disaster, even if it just a burst water main,
here is what you need.
Buy
a Bucket Adapter Kit, HERE,
it costs $17.00
Buy
a Sawyer Mini Water Filter, HERE,
it costs $28.99
Buy
a 5 gal. 70 mil Food Grade Bucket, HERE,
it costs $5.98
The
total cost is only $51.97, which works out to be .52 for 1,000 gallons (3,785
liters) of water!
So
don’t get caught un-prepped. Make sure
you have your essential water needs met.
I
hope that you continue to enjoy The Woodsman’s Journal Online and look for me
on YouTube at BandanaMan Productions for other related videos, HERE. Don’t forget to follow me on both The
Woodsman’s Journal Online, HERE,
and subscribe to BandanaMan Productions on YouTube. If you have questions, as always, feel free
to leave a comment on either site. I
announce new articles on Facebook at Eric Reynolds, on Instagram at
bandanamanaproductions, and on VK at Eric Reynolds, so watch for me.
That
is all for now, and as always, until next time, Happy Trails!
Sources
Sawyer;
“How Sawyer Filters Work”, [© 2026 Sawyer], https://www.sawyer.com/blog/filters-work-2,
accessed November 21, 2026
Sawyer; “Sawyer International Bucket System”, [© 2026
Sawyer], https://www.sawyer.com/product/international-bucket-system,
accessed November 21, 2026
Sawyer;
“Sawyer Standard”, [© 2026 Sawyer], https://www.sawyer.com/sawyer-standard,
accessed November 21, 2026

































